Showing posts with label hardware products. Show all posts
Showing posts with label hardware products. Show all posts

Friday, March 28, 2014

Zinsser Bulls Eye Shellac, Clear, Product No. 00301

How to apply Zinsser Bulls Eye™ Finish & Sealer to your wood floors & furniture.

Bulls Eye Clear Shellac gives wood a clear, natural glow with a lustrous mid-gloss finish that will not yellow or darken with age.  You can use this product on any interior surface where you would like to have a golden-tone finish - even masonry and metal.

Remember to stir well before using.  By applying several thin coats, you will find it much easier to apply and will look better than thick heavy coats.

Below are steps to use Zinnser Bull Eye Shellac on wood floors.

Step 1:
Apply one thin and even coat using a quality brush, lint free cloth or sprayer and let dry 1 hour before sanding with 220 or finer grit sandpaper.

Step 2:
Once dried, remove all dust and apply second coat.  Allow any following coats to dry at least 1 hour before sanding lightly and recoating.


  • You can also use Zinsser Bulls Eye Shellac on doors, trims, paneling, cabinets and furniture:  Apply 1 or 2 coats, then let dry before sanding with 220 grit or finer sandpaper to ensure a smooth finish.

  • Use Zinsser Bulls Eye Shellac as a Protective Sealer for your tools, golf clubs, toys and more!  This product will even stick to glass and ceramic tile.

  • Use Zinsser Bulls Eye Shellac as an Odor Sealer as well.  Two coats of the shellac will seal odors in bare (or coated) drywall, masonry, plaster, woodwork and furniture.
Each gallon of Zinsser 00301 Bulls Eye Shellac covers approximately 400-600 sq. ft. per gallon.  It may vary due to coats used and porosity of different surfaces.  It also dries to the touch in 30 minutes or less.  Wait one hour before recoating.

For more information on this exact product, please visit Zinsser Bulls Eye Shellac - Vacuum World

Thursday, March 20, 2014

Fluidmaster 680 Toilet Tank Lever - How to Install

How to install your new Fluidmaster 680 Toilet Tank Lever

(Looking to purchase one?  Click the following link to purchase - Fluidmaster 680 Toilet Tank Lever for $3.49)


This particular toilet lever is in a white finish and installed in only 5 easy steps.

Step 1:  Remove tank lid.  Disconnect the flapper chain/linkage from the existing lever.  Unthread nut from old lever.  Remove old lever from tank.

Step 2:  For standard front mounting tanks, go to step 3.  For a side or angle mount tank, slowly bend new lever arm to match the shape of the old lever arm.  DO NOT BEND ARM QUICKLY OR BACK AND FORTH REPEATEDLY.

Step 3:  Measure length of existing lever arm.  If necessary, trim new arm at the cut line that best matches the length of the old arm (hacksaw recommended for best results).

Step 4:  Slide arm through tank hole until handle shank fits snugly.  Slip lock nut over lever (flat side facing handle).  Start nut on threads (reverse thread).  DO NOT TIGHTEN FULLY.

Step 5:  Connect flapper chain/linkage to arm hole that provides the best lift.  Chain should have slight slack when flapper is in the closed position.  Check lift action for proper flush.  Turn locknut in direction shown.  Thread locknut until snug.  DO NOT OVERTIGHTEN; Over-tightening may crack tank.

Wednesday, November 13, 2013

Black Jack Driveway Crack Filler

Easy to use pourable driveway crack filler.

Black Jack Driveway Crack Filler

Now as the winter and cold weather is approaching, we start to notice all the potholes forming as we drive on highways and roads.  Nothing is more annoying when it happens in your own driveway.  A crack starts in a small area and then starts to get bigger and bigger.  Before you know it, you may be forming potholes in your driveway.  If you start to notice small cracks, you can use a crack filler and stops the cracks from getting bigger.

The Black Jack Driveway Crack Filler is a product made by Gardner Gibson.  They specialize in blacktop repair and roof coatings.  It fills and seals cracks that are up to 1/2" wide.  A half inch doesn't seem that big but when its happening in blacktop, it's very wide.  After applying it you will see that it dries to a black, rubber seal, providing a crack free surface prior to adding extra sealer.

What's also great is that you can use it straight from the gallon itself.  You must shake the gallon well to mix the contents.  After that, you use the included spout (on the underside of the gallon cap) and squeeze the contents into the crack.  If you have a deep crack you can partially fill it with sand and then add the crack filler on top.

One gallon of the Black Jack Driveway Crack Filler fills 200-225 linear feat.  It also weighs just about 10 pounds.

Now is the time to start sealing your cracks, before it gets too cold out and more crack will form!

Click the link below to get more information.  Don't forget to sound off in the comments section if you have used this item before!

Black Jack Driveway Crack Filler

Tuesday, November 12, 2013

Minwax 60950 Hardwood Floor Reviver

What makes Minwax Hardwood Floor Reviver the best product to bring back shine to your wood floors?

Well for one, the Minwax Company has been around since the early 1900's.  Through the years, they have perfected their brand to be the best there is.  Their products range from wood stains, finishes, repair and maintenance, and even brushes. They keep the environment in mind when making new items so that's always a plus in my book.

Now let's get back to the Minwax 60950 Hardwood Floor Reviver.  This particular item comes in a 32 ounce bottle and gives you about 175-225 square feet of coverage.  This product brings back luster and shine to your hardwood floors that have become dull, scratched or showing signs of wear and tear.  It is a permanent finish that not only brings back shine but adds a layer of protection to your polyurethane floors.  It dries quickly, has very little odor and will leave a crystal clean finish.

You can purchase this item at various hardware stores, including Home Depot.  The average price I have found online is at about $20.  We have a current promotion going on until the end of the year and you can purchase yours for $17.25.  Click the link below for more information.

Minwax 60950 Hardwood Floor Reviver

Have any of you used this product?  Let me know your experience with the Minwax Reviver in the comments section below!

Monday, November 11, 2013

Hardware products now added!

Hello to my readers out there!  I haven't posted in a while and wanted to jump back in.

I just wanted to let all my readers know is that now, we at Vacuum World, are adding new products weekly to our site.

As you know, we sell Vacuum Cleaners, janitorial supplies, paper products and now, Hardware items too!

I'd like to give you all examples of some Hardware categories that are now live on our site.
  • Looking for roof cement or roof coatings?  Check out our Roofing section.
  • Looking for Polyurethane?  Check out our Wood Floor section.
  • Looking for Drain Cleaners?  Check out our Drain Cleaner section.
We will be adding new items weekly so keep an eye out for new products.


I'll be posting new information about various products that we sell and hope you all follow along!

Until next time :)